// CODE SNIPPET
702.3 Continuous Flow
Related Code Sections
702.3 Sanitary Drainage, Continuous Flow
For a continuous flow into a drainage system, such as from a pump, sump ejector, air conditioning equipment, or similar device, 2 fixture units shall ...
2018 Uniform Plumbing Code of Nevada > 7 Sanitary Drainage > 702.0 Fixture Unit Equivalents > 702.3 Continuous Flow
1104.0 Storm Drainage, Values for Continuous Flow
Where there is a continuous or semi-continuous discharge into the building storm drain or building storm sewer, as from a pump, ejector, air ...
1101.6.3 Storm Drainage, Splash Blocks
For separate dwellings not serving continuously flowing springs or groundwater, the sump discharge pipe shall be permitted to discharge onto ...
2018 Uniform Plumbing Code of Nevada > 11 Storm Drainage > 1101.0 General > 1101.6 Subsoil Drains > 1101.6.3 Splash Blocks
10.10.2.1.2 Underground Requirements,
The flushing operation shall continue until water flow is verified to be clear of debris. [ 24: 10.10.2.1.2] ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 10 Underground Requirements > 10.10 Testing and Acceptance > 10.10.2 Acceptance Requirements > 10.10.2.1* Flushing of Piping > 10.10.2.1.2
G184.108.40.206 Normative Appendix G Performance Rating Method, Hot-Water Pumps
The baseline building design hot-water pump power shall be 19 W/gpm. The pumping system shall be modeled as primary-only with continuous variable ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Nevada > Normative Appendix G Performance Rating Method > G3 Calculation of the Proposed Design and Baseline Building Performance > G3.1 Building Performance Calculations > G3.1.3 System-Specific Baseline HVAC System Requirements > G220.127.116.11 Hot-Water Pumps