// CODE SNIPPET
1910.106(f)(3)(vi) Container Filling Facilities
JUMP TO FULL CODE CHAPTER
Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
Related Code Sections
1910.106(f)(3)(vi) Hazardous Materials, Container Filling Facilities
unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(f) Bulk Plants > 1910.106(f)(3) Loading and Unloading Facilities > 1910.106(f)(3)(vi) Container Filling Facilities
1910.110(d)(12)(iv) Hazardous Materials,
To minimize trespassing or tampering, the area which includes container appurtenances, pumping equipment, loading and unloading facilities ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(d) > 1910.110(d)(12) > 1910.110(d)(12)(iv)
1910.111(a)(2)(viii) Hazardous Materials, Filling Density
the percent ratio of the weight of the gas in a container to the weight of water at 60 deg. F. that the container will hold ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.111 Storage and Handling of Anhydrous Ammonia > 1910.111(a) General > 1910.111(a)(2) Definitions > 1910.111(a)(2)(viii) Filling Density
1910.102(c) Hazardous Materials, Generators and Filling Cylinders
Employers must ensure that facilities, equipment, structures, or installations used to generate acetylene or to charge (fill) acetylene cylinders ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.102 Acetylene > 1910.102(c) Generators and Filling Cylinders
1910.111(f)(3) Hazardous Materials, Container Appurtenances
, to prevent back-flow in case the filling connection is broken. Where the filling and discharge connect to a common opening in the container shell ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.111 Storage and Handling of Anhydrous Ammonia > 1910.111(f) Tank Motor Vehicles for the Transportation of Ammonia > 1910.111(f)(3) Container Appurtenances