// CODE SNIPPET
Section 803 Construction Tolerances
JUMP TO FULL CODE CHAPTER
The construction tolerance for dimensions for the overall length, width and depth of the pool shall be ± 3 inches (76 mm). The construction tolerance for all other dimensions shall be ± 2 inches (51 mm), unless otherwise specified by the design engineer.
Related Code Sections
1029.13.2.2.1 Means of Egress, Construction Tolerances
The tolerance between adjacent risers on a stepped aisle that were designed to be equal height shall not exceed 3 / 16 inch (4.8 mm). Where ...
MA State Building Code, 9th ed, Base Volume > 10 Means of Egress > 1029 Assembly > 1029.13 Assembly Aisle Walking Surfaces > 1029.13.2 Stepped Aisles > 1029.13.2.2 Risers > 1029.13.2.2.1 Construction Tolerances
Section 803 Permanent Inground Residential Swimming Pools, Construction Tolerances
The construction tolerance for dimensions for the overall length, width and depth of the pool shall be ± 3 inches (76 mm). The construction tolerance ...
Swimming Pool and Spa Code 2015 of Massachusetts > 8 Permanent Inground Residential Swimming Pools > 803 Construction Tolerances
401.4 Public Swimming Pools, Dimensional Tolerances
Finished pool dimensions, for other than Class A pools, shall be held within the construction tolerances shown in Table 401.4. Other dimensions ...
Swimming Pool and Spa Code 2015 of Massachusetts > 4 Public Swimming Pools > 401 General > 401.4 Dimensional Tolerances
3184.108.40.206 Special Construction, Solid Barrier Surfaces
Solid barriers which do not have openings shall not contain indentations or protrusions except for normal construction tolerances and tooled masonry ...
MA State Building Code, 8th ed, Base Volume > 31 Special Construction > 3109 Swimming Pool Enclosures and Safety Devices > 3109.4 Residential Swimming Pools > 3109.4.1 Barrier Height and Clearances > 3220.127.116.11 Solid Barrier Surfaces