// CODE SNIPPET
511.4.3 Construction and Clearance
JUMP TO FULL CODE CHAPTER
The bleed-air duct shall have the same construction and clearance requirements as the main exhaust duct from the connection to the exhaust duct to not less than 12 inches (305 mm) on both sides of the fire damper. [NFPA 96:8.4.4]
Related Code Sections
511.4.3 Exhaust Systems, Construction and Clearance
The bleed-air duct shall have the same construction and clearance requirements as the main exhaust duct from the connection to the exhaust duct ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 511.0 Air Movement > 511.4 Common Duct (Manifold) Systems > 511.4.3 Construction and Clearance
507.4.6.3 Exhaust Systems, Clearance Options
evaluated shall be clearly identified in their listing and installation documentation and on their labels: Open combustible construction clearance ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 507.0 General Requirements > 507.4 Clearance > 507.4.6 Both Field-Applied and Factory Built > 507.4.6.3 Clearance Options
M1306.2.1 General Mechanical System Requirements, Solid-Fuel Appliances
Table M1306.2 shall not be used to reduce the clearance required for solid-fuel appliances listed for installation with minimum clearances of 12 ...
Residential Code 2012 of Nevada > 13 General Mechanical System Requirements > M1306 Clearances From Combustible Construction > M1306.2 Clearance Reduction > M1306.2.1 Solid-Fuel Appliances
M1306.2.1 General Mechanical System Requirements, Labeled Assemblies
The allowable clearance shall be based on an approved reduced clearance protective assembly that is listed and labeled in accordance with UL 1618 ...
Residential Code 2018 of Nevada > 13 General Mechanical System Requirements > M1306 Clearances From Combustible Construction > M1306.2 Clearance Reduction > M1306.2.1 Labeled Assemblies
303.10 General Regulations, Clearances
be installed to maintain the required clearances for servicing and to combustible construction in accordance with the listing and the manufacturer's ...
2018 Uniform Mechanical Code of Nevada > 3 General Regulations > 303.0 Installation > 303.10 Clearances