// CODE SNIPPET
(D) Constant Power
Related Code Sections
(D) Special Occupancies, Constant Power
A stage switchboard containing only over-current protective devices and no control elements ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.26 Type of Switchboard > (D) Constant Power
430.29 Equipment for General Use, Constant Voltage Direct-Current Motors — Power Resistors
Conductors connecting the motor controller to separately mounted power accelerating and dynamic braking resistors in the armature circuit shall have ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.29 Constant Voltage Direct-Current Motors — Power Resistors
(E) Wiring Methods and Materials, Airfield Lighting Cable Tray
lighting cable used in series circuits that are rated up to 5000 volts and are powered by constant current regulators shall be permitted to be installed ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 392 Cable Trays > 392.10 Uses Permitted > (E) Airfield Lighting Cable Tray
(6) Special Occupancies, Wire-Pulling Compounds
Wire-pulling compounds that increase the dielectric constant shall not be used on the secondary conductors of the isolated power supply ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 517 Health Care Facilities > 517.160 Isolated Power Systems > (A) Installations > (6) Wire-Pulling Compounds
3.3.281.2 Definitions, Proprietary Supervising Station Alarm System
located at the protected premises, or at one of multiple noncontiguous protected premises, at which trained, competent personnel are in constant ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 3 Definitions > 3.3 General Definitions > 3.3.281 Supervising Station Alarm Systems > 3.3.281.2 Proprietary Supervising Station Alarm System