// CODE SNIPPET
504.3.11 Connector Rise Measurement
JUMP TO FULL CODE CHAPTER
Connector rise (R) for each appliance connector shall be measured from the draft hood outlet or flue collar to the centerline where the vent gas streams come together.
Related Code Sections
504.3.11 Chimneys and Vents, Connector Rise Measurement
Connector rise ( R ) for each appliance connector shall be measured from the draft hood outlet or flue collar to the centerline where the vent gas ...
Fuel Gas Code 2015 of Utah > 5 Chimneys and Vents > 504 (IFGS) Sizing of Category I Appliance Venting Systems > 504.3 Application of Multiple Appliance Vent Tables 504.3(1) Through 504.3(7) > 504.3.11 Connector Rise Measurement
504.3.11 Chimneys and Vents, Connector Rise Measurement
Connector rise ( R ) for each appliance connector shall be measured from the draft hood outlet or flue collar to the centerline where the vent gas ...
Fuel Gas Code 2018 of Utah > 5 Chimneys and Vents > 504 (IFGS) Sizing of Category I Appliance Venting Systems > 504.3 Application of Multiple Appliance Vent Tables 504.3(1) Through 504.3(7) > 504.3.11 Connector Rise Measurement
G2428.3.11 Fuel Gas, (504.3.11) Connector Rise Measurement
Connector rise ( R ) for each appliance connector shall be measured from the draft hood outlet or flue collar to the centerline where the vent ...
Residential Code 2015 of Utah > 24 Fuel Gas > G2428 (504) Sizing of Category I Appliance Venting Systems > G2428.3 (504.3) Application of Multiple Appliance Vent Tables G2428.3(1) Through G2428.3(4) > G2428.3.11 (504.3.11) Connector Rise Measurement
Section 803 Chimneys and Vents, Connectors
Connectors shall rise vertically to the chimney or vent with a minimum pitch equal to one-fourth unit vertical in 12 units horizontal (2 ...
Section 803 Chimneys and Vents, Connectors
Connectors shall rise vertically to the chimney or vent with a minimum ...