// CODE SNIPPET
P3005.5 Connections to Offsets and Bases of Stacks
JUMP TO FULL CODE CHAPTER
Horizontal branches shall connect to the bases of stacks at a point located not less than 10 times the diameter of the drainage stack downstream from the stack. Horizontal branches shall connect to horizontal stack offsets at a point located not less than 10 times the diameter of the drainage stack downstream from the upper stack.
Related Code Sections
704.3 Sanitary Drainage, Connections to Offsets and Bases of Stacks
Horizontal branches shall connect to the bases of stacks at a point located not less than 10 times the diameter of the drainage stack downstream ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 704 Drainage Piping Installation > 704.3 Connections to Offsets and Bases of Stacks
P3005.5 Sanitary Drainage, Connections to Offsets and Bases of Stacks
Horizontal branches shall connect to the bases of stacks at a point located not less than 10 times the diameter of the drainage stack downstream from ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3005 Drainage System > P3005.5 Connections to Offsets and Bases of Stacks
Section 907 Vents, Vents for Stack Offsets
connection installed in accordance with Section 904.4. The offset shall be considered to be the base of the stack ...
Section P3109 Vents, Waste Stack Vent
, and both horizontal and vertical offsets shall be prohibited between the lowest fixture drain connection and the highest fixture drain connection ...
917.7 Vents, Stack Offsets
Where fixture drains are not connected below a horizontal offset in a stack , a horizontal offset shall not be required to be vented. Where ...