// CODE SNIPPET
706.1 Connections and Changes in Direction
Related Code Sections
706.1 Sanitary Drainage, Connections and Changes in Direction
Connections and changes in direction of the sanitary drainage system shall be made with approved drainage fittings. Connections between drainage ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 706 Connections Between Drainage Piping and Fittings > 706.1 Connections and Changes in Direction
1101.6 Storm Drainage, Fittings and Connections
Connections and changes in direction of the storm drainage system shall be made with approved drainage-type fittings in accordance with Table 706.3 ...
5703.6.9.1 Flammable and Combustible Liquids, Fiberglass-Reinforced Plastic Piping
of the connection where such connections result in a change of direction. In lieu of the minimum 4-foot (1219 mm) straight run length, approved and listed ...
Fire Code 2018 of Kansas > 57 Flammable and Combustible Liquids > 5703 General Requirements > 5703.6 Piping Systems > 5703.6.9 Flexible Joints > 5703.6.9.1 Fiberglass-Reinforced Plastic Piping
370.42 Wiring Methods and Materials, Fittings
A cablebus system shall include approved fittings for the following: Changes in horizontal or vertical direction of the run Dead ends ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 370 Cablebus > 370.42 Fittings
1012.6.4 Means of Egress, Change in Direction
Where changes in direction of travel occur at landings provided between ramp runs, the landing shall be 60 inches by 60 inches (1524 mm by 1524 mm ...
Building Code 2018 of Kansas > 10 Means of Egress > 1012 Ramps > 1012.6 Landings > 1012.6.4 Change in Direction