// CODE SNIPPET
(C) Connection to Conductors
Related Code Sections
(C) Equipment for General Use, Connection to Conductors
Heating cables shall be connected to branch-circuit and supply wiring by wiring methods described in the installation instructions ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.45 Installation of Cables Under Floor Coverings > (C) Connection to Conductors
242.30 Wiring and Protection, Connection Between Conductors
An SPD shall be permitted to be connected between any two conductors — ungrounded conductor(s), grounded conductor, equipment grounding conductor ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 242 Overvoltage Protection > 242.30 Connection Between Conductors
(B) Wiring Methods and Materials, Bare Conductors
Taps from bare conductors shall leave the gutter opposite their terminal connections, and conductors shall not be brought in contact with uninsulated ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 366 Auxiliary Gutters > 366.56 Splices and Taps > (B) Bare Conductors
(1) Special Equipment, Conductors
The cord shall be a listed type with three or four conductors, for single-phase connection, one conductor of which shall be identified in accordance ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 626 Electrified Truck Parking Spaces > 626.25 Separable Power-Supply Cable Assembly > (B) Power-Supply Cord > (1) Conductors
376.20 Wiring Methods and Materials, Conductors Connected in Parallel
Where single conductor cables comprising each phase, neutral, or grounded conductor of an alternating-current circuit are connected in parallel ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 376 Metal Wireways > 376.20 Conductors Connected in Parallel