// CODE SNIPPET
802.4.3.1 Connection of Laundry Tray to Standpipe
JUMP TO FULL CODE CHAPTER
As an alternative for a laundry tray fixture connecting directly to a drainage system, a laundry tray waste line without a fixture trap shall connect to a standpipe for an automatic clothes washer drain. The standpipe shall extend not less than 30 inches (732 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
Related Code Sections
802.4.3.1 Indirect/Special Waste, Connection of Laundry Tray to Standpipe
As an alternative for a laundry tray fixture connecting directly to a drainage system, a laundry tray waste line without a fixture trap shall connect ...
Plumbing Code 2018 of Utah > 8 Indirect/Special Waste > 802 Indirect Wastes > 802.4 Waste Receptors > 802.4.3 Standpipes > 802.4.3.1 Connection of Laundry Tray to Standpipe
P2706.1.2.1 Plumbing Fixtures, Laundry Tray Connection to Standpipe
Where a laundry tray waste line connects into a standpipe for an automatic clothes washer drain, the standpipe shall extend not less than 30 inches ...
Residential Code 2015 of Utah > 27 Plumbing Fixtures > P2706 Waste Receptors > P2706.1 General > P2706.1.2 Standpipes > P2706.1.2.1 Laundry Tray Connection to Standpipe
P3201.6 Traps, Number of Fixtures Per Trap
inches (762 mm) apart. Connection of a laundry tray waste line into a standpipe for the automatic clothes-washer drain shall be permitted in accordance ...
Residential Code 2015 of Utah > 32 Traps > P3201 Fixture Traps > P3201.6 Number of Fixtures Per Trap
Section 802 Indirect/Special Waste, Indirect Wastes
As an alternative for a laundry tray fixture connecting directly to a drainage system, a laundry tray waste line without a fixture trap ...
Section 415 Fixtures, Faucets and Fixture Fittings, Laundry Trays
Laundry trays shall conform to ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1, ASME A112.19.3/CSA B45.4 or CSA B45.5/IAPMO Z124 ...