// CODE SNIPPET
914.4.1 Connection and Installation
JUMP TO FULL CODE CHAPTER
The relief vent shall connect to the horizontal branch drain between the stack and the most downstream fixture drain of the circuit vent. The relief vent shall be installed in accordance with Section 905.
Related Code Sections
914.4.1 Vents, Connection and Installation
The relief vent shall connect to the horizontal branch drain between the stack and the most downstream fixture drain of the circuit vent. The ...
Plumbing Code 2018 of Kansas > 9 Vents > 914 Circuit Venting > 914.4 Relief Vent > 914.4.1 Connection and Installation
(1) Equipment for General Use, Cord-Connected Installation
A luminaire or a listed assembly in compliance with any of the conditions in (a) through (c) shall be permitted to be cord connected provided ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.62 Cord-Connected Lampholders and Luminaires > (C) Electric-Discharge and LED Luminaires > (1) Cord-Connected Installation
411.1.3.1 Gas Piping Installations, Maximum Length
connector shall be used for each appliance . Exception: Rigid metallic piping used to connect an appliance to the piping system shall ...
Fuel Gas Code 2018 of Kansas > 4 Gas Piping Installations > 411 (IFGC) Appliance and Manufactured Home Connections > 411.1 Connecting Appliances > 411.1.3 Connector Installation > 411.1.3.1 Maximum Length
1203.3.1 Hydronic Piping, Brazed Joints
Joint surfaces shall be cleaned. An approved flux shall be applied where required. The joint shall be brazed with a filler metal conforming to AWS ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1203 Joints and Connections > 1203.3 Joint Preparation and Installation > 1203.3.1 Brazed Joints
1203.3.4 Hydronic Piping, Solvent-Cemented Joints
connections, a primer is not required where all of the following conditions apply: The solvent cement used is third-party certified as conforming ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1203 Joints and Connections > 1203.3 Joint Preparation and Installation > 1203.3.4 Solvent-Cemented Joints