// CODE SNIPPET
1926.960(e)(1) Connecting
Go To Full Code Chapter
In connecting deenergized equipment or lines to an energized circuit by means of a conducting wire or device, an employee shall first attach the wire to the deenergized part;
Upcodes Diagrams
Related Code Sections
1926.960(e)(1) Electric Power Transmission and Distribution, Connecting
In connecting deenergized equipment or lines to an energized circuit by means of a conducting wire or device, an employee shall first attach the wire ...
1926.404(a)(2) Electrical, Polarity of Connections
No grounded conductor shall be attached to any terminal or lead so as to reverse designated polarity ...
1926.914(l)(2) Blasting and the Use of Explosives, Connecting Wire
An insulated expendable wire used between electric blasting caps and the leading wires or between the bus wire and the leading wires ...
1926.956(d)(6) Electric Power Transmission and Distribution, Breaking Connections
Pressure shall be released before connections are broken, unless quick-acting, self-closing connectors are used ...
1926.962(f)(1) Electric Power Transmission and Distribution, Order of Connection
The employer shall ensure that, when an employee attaches a ground to a line or to equipment, the employee attaches the ground-end connection first ...