// CODE SNIPPET
102.1 Conflicts Between Codes
JUMP TO FULL CODE CHAPTER
Where the requirements
within the jurisdiction of this mechanical code conflict with
the requirements of the plumbing code, the plumbing code
shall prevail. In instances where this code, applicable standards,
or the manufacturer's installation instructions conflict,
the more stringent provisions shall prevail. Where there is a
conflict between a general requirement and a specific requirement,
the specific requirement shall prevail [OSHPD 1, 1R,
2, 3, 4 & 5] See Chapter 1, Division I, Section 1.1.7.
Related Code Sections
102.1 Administration, Conflicts Between Codes
Where the requirements
within the jurisdiction of this mechanical code conflict with
the requirements of the plumbing code, the plumbing code
shall ...
California Mechanical Code 2016 > 1 Administration > 102.0 Applicability > 102.1 Conflicts Between Codes
102.1 Administration, Conflicts Between Codes
Where the requirements
within the jurisdiction of this mechanical code conflict with
the requirements of the plumbing code, the plumbing code
shall ...
California Mechanical Code 2019 > 1 Administration > 102.0 Applicability > 102.1 Conflicts Between Codes
102.1 Administration, Conflicts Between Codes
Where the requirements
within the jurisdiction of this plumbing code conflict with the
requirements of the mechanical code, this code shall prevail ...
California Plumbing Code 2019 > 1 Administration > 102.0 Applicability > 102.1 Conflicts Between Codes
102.1 Administration, Conflicts Between Codes
Where the requirements
within the jurisdiction of this plumbing code conflict with the
requirements of the mechanical code, this code shall prevail ...
California Plumbing Code 2016 > 1 Administration > 102.0 Applicability > 102.1 Conflicts Between Codes
102.4.1 Scope and Administration, Conflicts
Where conflicts occur between provisions of this code and referenced codes and standards, the provisions of this code shall apply ...
California Existing Building Code 2019 > 1 Scope and Administration > 102 Applicability > 102.4 Referenced Codes and Standards > 102.4.1 Conflicts