// CODE SNIPPET
(G) Conductors From Generator Terminals
Related Code Sections
(G) Wiring and Protection, Conductors From Generator Terminals
Conductors from generator terminals that meet the size requirement in 445.13 shall be permitted to be protected against overload by the generator ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.21 Location in Circuit > (G) Conductors From Generator Terminals
445.13 Equipment for General Use, Ampacity of Conductors
The ampacity of the conductors from the generator output terminals to the first distribution device(s) containing overcurrent protection shall ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 445 Generators > 445.13 Ampacity of Conductors
551.30 Special Occupancies, Generator Installations
The supply conductors from the engine generator to the first termination on the vehicle shall be of the stranded type ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 551 Recreational Vehicles and Recreational Vehicle Parks > 551.30 Generator Installations
250.35 Wiring and Protection, Permanently Installed Generators
A conductor that provides an effective ground-fault current path shall be installed with the supply conductors from a permanently installed generator ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.35 Permanently Installed Generators
(D) Special Conditions, Generator Set
, an additional disconnecting means shall not be required where ungrounded conductors serve or pass through the building or structure. Where the generator ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 701 Legally Required Standby Systems > 701.12 General Requirements > (D) Generator Set