// CODE SNIPPET
110.5 Conductors
JUMP TO FULL CODE CHAPTER
Conductors used to carry current shall be of copper, aluminum, or copper-clad aluminum unless otherwise provided in this Code. Where the conductor material is not specified, the sizes given in this Code shall apply to copper conductors. Where other materials are used, the size shall be changed accordingly.
Related Code Sections
110.5 General, Conductors
Conductors used to carry current shall be of copper, aluminum, or copper-clad aluminum unless otherwise provided in this Code. Where the conductor ...
National Electrical Code 2020 of Minnesota > 1 General > 110 Requirements for Electrical Installations > 110.5 Conductors
300.3 Wiring Methods and Materials, Conductors
Single conductors specified in Table 310.4(A) shall only be installed where part of a recognized wiring method of Chapter 3. Exception: Individual ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.3 Conductors
310.3 Wiring Methods and Materials, Conductors
The minimum size of conductors for voltage ratings up to and including 2000 volts shall be 14 AWG copper or 12 AWG aluminum or copper-clad aluminum ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 310 Conductors for General Wiring > 310.3 Conductors
311.12 Wiring Methods and Materials, Conductors
The minimum size of conductors shall be as shown in Table 311.12(A), except as permitted elsewhere in this Code. Table 311.12(A) Minimum Size ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 311 Medium Voltage Conductors and Cable > 311.12 Conductors
(3) Wiring Methods and Materials, Conductors
Conductors used exclusively for control or instrumentation circuits shall comply with either 312.8(B)(3)(a) or (B)(3)(b). (a) Conductors shall ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 312 Cabinets, Cutout Boxes, and Meter Socket Enclosures > 312.8 Switch and Overcurrent Device Enclosures > (B) Power Monitoring or Energy Management Equipment > (3) Conductors