// CODE SNIPPET
E3605.9.6 Conductor Arrangement
Related Code Sections
E3605.9.6 Services, Conductor Arrangement
Service-entrance and overhead service conductors shall be arranged so that water will not enter service raceways or equipment. [230.54(G)] ...
Residential Code 2018 of Kansas > 36 Services > E3605 Service-Entrance Conductors > E3605.9 Overhead Service Locations > E3605.9.6 Conductor Arrangement
(1) Equipment for General Use, AC Phase Arrangement
Alternating-current phase arrangement on 3-phase buses shall be A, B, C from front to back, top to bottom, or left to right, as viewed from the front ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.3 Support and Arrangement of Busbars and Conductors > (E) Bus Arrangement > (1) AC Phase Arrangement
(5) Wiring Methods and Materials, Conductors
Conductors shall be arranged so the power distribution block terminals are unobstructed following installation ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 376 Metal Wireways > 376.56 Splices, Taps, and Power Distribution Blocks > (B) Power Distribution Blocks > (5) Conductors
(F) Equipment for General Use, Tension
Conductors shall be arranged so that the weight of the luminaire or movable parts does not put tension on the conductors ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.56 Protection of Conductors and Insulation > (F) Tension
(5) Wiring Methods and Materials, Through Conductors
Where the pull or junction boxes are used for conductors that do not terminate on the power distribution block(s), the through conductors shall ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.28 Pull and Junction Boxes and Conduit Bodies > (E) Power Distribution Blocks > (5) Through Conductors