The test operator in charge shall conduct these routine safety checks before each series of tests and shall verify at least the following conditions:
Barriers and safeguards are in workable condition and placed properly to isolate hazardous areas;
Clearly marked test-power disconnects are readily available in an emergency;
Ground connections are clearly identifiable;
Personal protective equipment is provided and used as required by Subpart E of this part and by this subpart; and
Proper separation between signal, ground, and power cables.
[79 FR 20710-20711, July 10, 2014]
[79 FR 20710-20711, July 10, 2014]
System test status signals, if used, are in operable condition;