// CODE SNIPPET
4.6.9 Conditions for Occupancy
JUMP TO FULL CODE CHAPTER
No new construction or existing building shall be occupied in whole or in part in violation of the provisions of this Code, unless the following conditions exist:
Where compliance with this Code is effected by means of a performance-based design, the owner shall annually certify compliance with the conditions and limitations of the design by submitting a warrant of fitness acceptable to the authority having jurisdiction. The warrant of fitness shall attest that the building features, systems, and use have been inspected and confirmed to remain consistent with design specifications outlined in the documentation required by Section 5.8 and that such features, systems, and use continue to satisfy the goals and objectives specified in Sections 4.1 and 4.2. (See Chapter 5.)
Related Code Sections
4.6.9 General, Conditions for Occupancy
conditions exist: A plan of correction has been approved. The occupancy classification remains the same. No serious life safety hazard exists ...
Life Safety Code 2018 of Kansas > 4 General > 4.6 General Requirements > 4.6.9 Conditions for Occupancy
(A) Wiring Methods and Materials, Atmospheric Conditions and Occupancies
Galvanized steel and stainless steel RMC shall be permitted under all atmospheric conditions and occupancies ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 344 Rigid Metal Conduit: Type RMC > 344.10 Uses Permitted > (A) Atmospheric Conditions and Occupancies
(A) Wiring Methods and Materials, All Atmospheric Conditions and Occupancies
Use of IMC shall be permitted under all atmospheric conditions and occupancies ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 342 Intermediate Metal Conduit: Type IMC > 342.10 Uses Permitted > (A) All Atmospheric Conditions and Occupancies
508.3.1.2 General Building Heights and Areas, Group I-2, Condition 2 Occupancies
Where one of the nonseparated occupancies is Group I-2, Condition 2, the most restrictive requirements of Sections 407, 509 and 712 shall apply ...
Building Code 2018 of Kansas > 5 General Building Heights and Areas > 508 Mixed Use and Occupancy > 508.3 Nonseparated Occupancies > 508.3.1 Occupancy Classification > 508.3.1.2 Group I-2, Condition 2 Occupancies
303.9 General Regulations, Fireplaces in Group I-2, Condition 2 Occupancies
Fuel-burning appliances and fireplaces in Group I-2, Condition 2 occupancies shall be in accordance with Section 901.4 ...
Mechanical Code 2018 of Kansas > 3 General Regulations > 303 Equipment and Appliance Location > 303.9 Fireplaces in Group I-2, Condition 2 Occupancies