// CODE SNIPPET
722.3.4 Concrete Masonry Lintels
JUMP TO FULL CODE CHAPTER
Fire-resistance ratings for concrete masonry lintels shall be determined based on the nominal thickness of the lintel and the minimum thickness of concrete masonry or concrete, or any combination thereof, covering the main reinforcing bars, as determined in accordance with Table 722.3.4, or by approved alternate methods.
OF LINTEL (inches)
|FIRE-RESISTANCE RATING (hours)|
|10 or greater||11/2||11/2||11/2||13/4|
For SI: 1 inch = 25.4 mm.
Related Code Sections
722.3.4 Fire and Smoke Protection Features, Concrete Masonry Lintels
Fire-resistance ratings for concrete masonry lintels shall be determined based on the nominal thickness of the lintel and the minimum thickness ...
2018 Philadelphia Building Code > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.3 Concrete Masonry > 722.3.4 Concrete Masonry Lintels
R606.10 Wall Construction, Lintels
Masonry over openings shall be supported by steel lintels, reinforced concrete or masonry lintels or masonry arches, designed to support load imposed ...
2018 Philadelphia Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.10 Lintels
2220.127.116.11 Masonry, Lintels
Lintels shall be considered to be structural members and shall be designed in accordance with the applicable provisions of Chapter 16 ...
2018 Philadelphia Building Code > 21 Masonry > 2109 Empirical Design of Adobe Masonry > 2109.2 Adobe Construction > 2109.2.4 Detailed Requirements > 218.104.22.168 Lintels
R703.8.3 Wall Covering, Lintels
Masonry veneer shall not support any vertical load other than the dead load of the veneer above. Veneer above openings shall be supported on lintels ...
2018 Philadelphia Residential Code > 7 Wall Covering > R703 Exterior Covering > R703.8 Anchored Stone and Masonry Veneer, General > R703.8.3 Lintels