// CODE SNIPPET
1607.4 Concentrated Loads
JUMP TO FULL CODE CHAPTER
Floors and other similar surfaces shall be designed to support the uniformly distributed live loads prescribed in Section 1607.3 or the concentrated load, in pounds (kilonewtons), given in Table 1607.1, whichever produces the greater load effects. Unless otherwise specified, the indicated concentration shall be assumed to be uniformly distributed over an area 2.5 feet by 2.5 feet (762 mm × 762 mm) and shall be located so as to produce the maximum load effects in the structural members.
Related Code Sections
1607.4 Structural Design, Concentrated Loads
Floors and other similar surfaces shall be designed to support the uniformly distributed live loads prescribed in Section 1607.3 or the concentrated ...
1607.4 Structural Design, Concentrated Loads
Floors and other similar surfaces shall be designed to support the uniformly distributed live loads prescribed in Section 1607.3 or the concentrated ...
§27-557 Loads, Floor Live Loads
, the design load shall be determined by the architect or engineer subject to approval by the commissioner. (b) Concentrated live loads. (1) The building ...
1607.6 Structural Design, Garages
TABLE 1607.6 UNIFORM AND CONCENTRATED LOADS LOADING CLASS a UNIFORM LOAD (pounds/linear foot of lane) CONCENTRATED LOAD ...
2104.9 Masonry, Floor and Roof Anchorage
Concentrated loads shall be supported upon construction of solid masonry, concrete, or masonry of hollow units with cells filled with mortar, grout ...