// CODE SNIPPET
2105.3.2 Compressive Strength Calculations
Related Code Sections
2105.3.2 Masonry, Compressive Strength Calculations
The compressive strength of prisms shall be the value calculated in accordance ASTM C 1314, except that the net cross-sectional area of the prism ...
2014 FBC - Building, 5th edition > 21 Masonry > 2105 Quality Assurance > 2105.3 Testing Prisms From Constructed Masonry > 2105.3.2 Compressive Strength Calculations
23.4 Strut-And-Tie Models, Strength of Struts
The nominal compressive strength of a strut, F ns , shall be calculated by (a) or (b): (a) Strut without longitudinal reinforcement F ...
Building Code Requirements for Structural Concrete of Florida > 23 Strut-And-Tie Models > 23.4 Strength of Struts
22.2.2 Sectional Strength, Design Assumptions for Concrete
Tensile strength of concrete shall be neglected in flexural and axial strength calculations ...
Building Code Requirements for Structural Concrete of Florida > 22 Sectional Strength > 22.2 Design Assumptions for Moment and Axial Strength > 22.2.2 Design Assumptions for Concrete
126.96.36.199.3 Reinforcement Details,
to use an increased value of compressive stress in concrete when calculating the nominal strength of the general zone ...
Building Code Requirements for Structural Concrete of Florida > 25 Reinforcement Details > 25.9 Anchorage Zones for Post-Tensioned Tendons > 25.9.4 General Zone > 188.8.131.52 Limiting Stresses in General Zones > 184.108.40.206.3