UpCodes logo
Go To Full Code Chapter
Compression gaskets for hub and spigot pipe and fittings shall conform to ASTM C564. Gaskets shall be compressed when the pipe is fully inserted.

Related Code Sections

705.3.2 Sanitary Drainage, Compression Gasket Joints
Compression gaskets for hub and spigot pipe and fittings shall conform to ASTM C564 and shall be tested to ASTM C1563. Gaskets shall be compressed ...
P3003.4.2 Sanitary Drainage, Compression Gasket Joints
Compression gaskets for hub and spigot pipe and fittings shall conform to ASTM C564. Gaskets shall be compressed when the pipe is fully inserted ...
P3003.4.2 Sanitary Drainage, Compression Gasket Joints
Compression gaskets for hub and spigot pipe and fittings shall conform to ASTM C564. Gaskets shall be compressed when the pipe is fully inserted ...
403.11 Gas Piping Installations, Plastic Pipe, Joints and Fittings
recommended by the pipe manufacturer. Heat fusion fittings shall be marked "ASTM D2513." Where compression-type mechanical joints are used, the gasket ...
G2414.11 Fuel Gas, (403.11) Plastic Piping, Joints and Fittings
recommended by the pipe manufacturer. Heat fusion fittings shall be marked "ASTM D2513." Where compression-type mechanical joints are used, the gasket ...