UpCodes logo
Go To Full Code Chapter
Valves, fittings, and mufflers shall be pressure rated and shall bear the manufacturer's name or trademark by which the organization that manufactured the product can be identified and identification symbols to indicate the materials and service designations for which the manufacturer's rating applies.
NOTE: Valves and fittings rated for a different system may be used in hydraulic elevator systems when substantiated in accordance with the elevator code.

Related Code Sections

3.19.1.4 Hydraulic Elevators, Component Markings
Valves, fittings, and mufflers shall be pressure rated and shall bear the manufacturer's name or trademark by which the organization that manufactured ...
1025.2 Means of Egress, Markings Within Exit Components
Egress path markings shall be provided in interior exit stairways, interior exit ramps and exit passageways, in accordance with Sections 1025.2.1 ...
1025.2 Means of Egress, Markings Within Exit Components
Egress path markings shall be provided in interior exit stairways, interior exit ramps and exit passageways, in accordance with Sections 1025.2.1 ...
(A) Special Conditions, Identification
Emergency circuits shall be permanently marked so they will be readily identified as a component of an emergency circuit or system by the following ...
(A) Special Conditions, Identification
Emergency circuits shall be permanently marked so they will be readily identified as a component of an emergency circuit or system by the following ...