// CODE SNIPPET
184.108.40.206 Compliance With Manufacturers' Requirements
Related Code Sections
220.127.116.11 Building Envelope, Compliance With Manufacturers' Requirements
Insulation materials shall be installed in accordance with manufacturers ' recommendations and in such a manner as to achieve rated R-value ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 5 Building Envelope > 5.8 Product Information and Installation Requirements > 5.8.1 Insulation > 18.104.22.168 Compliance With Manufacturers' Requirements
301.5 Provisions for All Compliance Methods, Compliance With Accessibility
Accessibility requirements for existing buildings shall comply with the 2009 edition of ICC A117.1 ...
Existing Building Code 2018 of Illinois > 3 Provisions for All Compliance Methods > 301 Administration > 301.5 Compliance With Accessibility
1011.1.1 Change of Occupancy, Compliance With Chapter 9
The requirements of Chapter 9 shall be applicable throughout the building for the new occupancy classification based on the separation conditions set ...
Existing Building Code 2018 of Illinois > 10 Change of Occupancy > 1011 Change of Occupancy Classification > 1011.1 General > 1011.1.1 Compliance With Chapter 9
(1) Equipment for General Use, Compliance With Article 725
Where the transformer supplies a Class 1 power-limited circuit, Class 2, or Class 3 remote-control circuit complying with the requirements of Article ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.72 Overcurrent Protection > (C) Control Circuit Transformer > (1) Compliance With Article 725
1002.1 Change of Occupancy, Compliance With the Building Code
categories as defined in the International Building Code , the building shall comply with all of the applicable requirements of the International ...
Existing Building Code 2018 of Illinois > 10 Change of Occupancy > 1002 Special Use and Occupancy > 1002.1 Compliance With the Building Code