// CODE SNIPPET
2105.2.1 Compliance With F'M and F'AAC
JUMP TO FULL CODE CHAPTER
Compressive strength of masonry shall be considered satisfactory if the compressive strength of each masonry wythe and grouted collar joint equals or exceeds the value of f'm for clay and concrete masonry and f'AAC for AAC masonry. For partially grouted clay and concrete masonry, the compressive strength of both the grouted and ungrouted masonry shall equal or exceed the applicable f'm. At the time of prestress, the compressive strength of the masonry shall equal or exceed f'mi, which shall be less than or equal to f'm.
Related Code Sections
2105.2.1 Masonry, Compliance With F'M and F'AAC
Compressive strength of masonry shall be considered satisfactory if the compressive strength of each masonry wythe and grouted collar joint equals ...
2014 FBC - Building, 5th edition > 21 Masonry > 2105 Quality Assurance > 2105.2 Acceptance Relative to Strength Requirements > 2105.2.1 Compliance With F'M and F'AAC
1002.1 Change of Occupancy, Compliance With the Building Code
Where the character or use of an existing building or part of an existing building is changed to one of the following special use or occupancy ...
2017 FBC - Existing Building, 6th edition > 10 Change of Occupancy > 1002 Special Use and Occupancy > 1002.1 Compliance With the Building Code
1002.1 Change of Occupancy, Compliance With the Building Code
Where the character or use of an existing building or part of an existing building is changed to one of the following special use or occupancy ...
2014 FBC - Existing Building, 5th edition > 10 Change of Occupancy > 1002 Special Use and Occupancy > 1002.1 Compliance With the Building Code
1002.1 Change of Occupancy, Compliance With the Building Code
Where the character or use of an existing building or part of an existing building is changed to one of the following special use or occupancy ...
2020 FBC - Existing Building, 7th edition > 10 Change of Occupancy > 1002 Special Use and Occupancy > 1002.1 Compliance With the Building Code
1012.1.1 Change of Occupancy, Compliance With Chapter 9
The requirements of Chapter 9 shall be applicable throughout the building for the new occupancy classification based on the separation conditions set ...
2017 FBC - Existing Building, 6th edition > 10 Change of Occupancy > 1012 Change of Occupancy Classification > 1012.1 General > 1012.1.1 Compliance With Chapter 9