UpCodes logo
Go To Full Code Chapter
A grounding electrode conductor shall be connected in a wireway or other accessible enclosure on the supply side of the disconnecting means to one or more of the following, as applicable:
  1. Grounded service conductor(s)
  2. Equipment grounding conductor installed with the feeder
  3. Supply-side bonding jumper
The connection shall be made with exothermic welding or a connector listed as grounding and bonding equipment. The grounding electrode conductor shall be sized in accordance with 250.66 based on the service-entrance or feeder conductor(s) at the common location where the connection is made.

Related Code Sections

1104.3.1 Accessibility, Employee Work Areas
Common use circulation paths within employee work areas shall be accessible routes. Exceptions: Common use circulation paths, located within ...
1104.3.1 Accessibility, Employee Work Areas
Common use circulation paths within employee work areas shall be accessible routes. Exceptions: Common use circulation paths, located within ...
206.2.8 Scoping Requirements, Employee Work Areas
Common use circulation paths within employee work areas shall comply with 402. EXCEPTIONS: Common use circulation paths located within ...