// CODE SNIPPET
R606.9.1 Combined Units
JUMP TO FULL CODE CHAPTER
In walls or other structural members composed of different kinds or grades of units, materials or mortars, the maximum stress shall not exceed the allowable stress for the weakest of the combination of units, materials and mortars of which the member is composed. The net thickness of any facing unit that is used to resist stress shall be not less than 11/2 inches (38 mm).
Related Code Sections
R606.9.1 Wall Construction, Combined Units
the allowable stress for the weakest of the combination of units, materials and mortars of which the member is composed. The net thickness of any facing ...
2015 Michigan Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.9 Allowable Stresses > R606.9.1 Combined Units
7220.127.116.11 Fire and Smoke Protection Features, Multiwythe Walls of Different Material
For walls that consist of two or more wythes of different materials (concrete or concrete masonry units) in combination with clay masonry units ...
2015 Michigan Building Code > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.4 Clay Brick and Tile Masonry > 722.4.2 Multiwythe Walls > 718.104.22.168 Multiwythe Walls of Different Material
907.5.2.3.3 Fire Protection Systems, Group R-2
with combination audible/visible appliances, or future extension of the existing wiring from the unit smoke alarm locations to required locations for visible ...
2015 Michigan Building Code > 9 Fire Protection Systems > 907 Fire Alarm and Detection Systems > 907.5 Occupant Notification Systems > 907.5.2 Alarm Notification Appliances > 907.5.2.3 Visible Alarms > 907.5.2.3.3 Group R-2
915.2.1 Vents, Slope
The slope of a horizontal combination waste and vent pipe shall not exceed one-half unit vertical in 12 units horizontal (4-percent slope) and shall ...
2015 Michigan Plumbing Code > 9 Vents > 915 Combination Waste and Vent System > 915.2 Installation > 915.2.1 Slope
Section P3111 Vents, Combination Waste and Vent System
). The horizontal combination waste and vent pipe shall have a slope of not greater than 1 / 2 unit vertical in 12 units ...