// CODE SNIPPET
2610.8 Combinations of Roof Panels and Skylights
Related Code Sections
2610.8 Plastic, Combinations of Roof Panels and Skylights
Combinations of light-transmitting plastic roof panels and skylights shall be subject to the area and percentage limitations and separation ...
Building Code 2018 of Illinois > 26 Plastic > 2610 Light-Transmitting Plastic Skylight Glazing > 2610.8 Combinations of Roof Panels and Skylights
712.1.15 Fire and Smoke Protection Features, Skylights
Skylights and other penetrations through a fire-resistance-rated roof deck or slab are permitted to be unprotected, provided that the structural ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 712 Vertical Openings > 712.1 General > 712.1.15 Skylights
C402.2.1.1 [CE] Commercial Energy Efficiency, Skylight Curbs
Skylight curbs shall be insulated to the level of roofs with insulation entirely above the deck or R-5, whichever is less. Exception: Unit ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [CE] Commercial Energy Efficiency > C402 Building Envelope Requirements > C402.2 Specific Building Thermal Envelope Insulation Requirements (Prescriptive) > C402.2.1 Roof Assembly > C402.2.1.1 Skylight Curbs
1607.13.5 Structural Design, Photovoltaic Panel Systems
Roof structures that provide support for photovoltaic panel systems shall be designed in accordance with Sections 1607.13.5.1 through 1607.13.5.4 ...
Building Code 2018 of Illinois > 16 Structural Design > 1607 Live Loads > 1607.13 Roof Loads > 1607.13.5 Photovoltaic Panel Systems
C3.5.2 Normative Appendix C Methodology for Building Envelope Trade-Off Option in Section 5.6, Model Geometry and Thermal Zones
the roof area with which the skylight area is associated, in proportion to the associated roof area. If the total skylight area exceeds ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > Normative Appendix C Methodology for Building Envelope Trade-Off Option in Section 5.6 > C3 Simulation General Requirements > C3.5 Calculation of Proposed Envelope Performance Factor > C3.5.2 Model Geometry and Thermal Zones