// CODE SNIPPET
2304.9.2.3 Combination Simple and Two-Span Continuous Pattern
JUMP TO FULL CODE CHAPTER
Courses in end spans shall be alternating simple-span pattern and two-span continuous pattern. End joints shall be staggered in adjacent courses and shall bear on supports.
Related Code Sections
2304.9.2.3 Wood, Combination Simple and Two-Span Continuous Pattern
Courses in end spans shall be alternating simple-span pattern and two-span continuous pattern. End joints shall be staggered in adjacent courses ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.2 Layup Patterns > 2304.9.2.3 Combination Simple and Two-Span Continuous Pattern
2306.1.4 Wood, Lumber Decking
AREA LOAD a, b Flexure Deflection Simple span Two-span continuous Combination simple- and two-span continuous ...
Building Code 2018 of Illinois > 23 Wood > 2306 Allowable Stress Design > 2306.1 Allowable Stress Design > 2306.1.4 Lumber Decking
2304.9.2.5 Wood, Controlled Random Pattern
The decking shall extend across not fewer than three spans. End joints of pieces within 6 inches (152 mm) of the end joints of the adjacent pieces ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.2 Layup Patterns > 2304.9.2.5 Controlled Random Pattern
2304.9 Wood, Lumber Decking
Courses in end spans shall be alternating simple-span pattern and two ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking
24.2.4.1.2 Serviceability Requirements,
In Eq. (24.2.4.1.1), ρ' shall be calculated at midspan for simple and continuous spans, and at the support for cantilevers ...
Building Code Requirements for Structural Concrete of Illinois > 24 Serviceability Requirements > 24.2 Deflections Due to Service-Level Gravity Loads > 24.2.4 Calculation of Time-Dependent Deflections > 24.2.4.1 Nonprestressed Members > 24.2.4.1.2