// CODE SNIPPET
[BS] A206.6 Combination of Anchor Types
JUMP TO FULL CODE CHAPTER
New anchors used in combination on a single framing member shall be of compatible behavior and stiffness.
Related Code Sections
A206.6 Guidelines for the Seismic Retrofit of Existing Buildings, Combination of Anchor Types
New anchors used in combination on a single framing member shall be of compatible behavior and stiffness ...
2020 Existing Building Code of NYS > A Guidelines for the Seismic Retrofit of Existing Buildings > A206 Analysis and Design > A206.6 Combination of Anchor Types
A206.6 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms, Combination of Anchor Types
New anchors used in combination on a single framing member shall be of compatible behavior and stiffness ...
Existing Building Code 2015 of New York State > A2 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms > A206 Analysis and Design > A206.6 Combination of Anchor Types
A206.7 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms, Combination of Anchor Types
New anchors used in combination on a single framing member shall be of compatible behavior and stiffness ...
2010 Existing Building Code of NY > A2 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms > A206 Analysis and Design > A206.7 Combination of Anchor Types
E604.1 Manufactured Housing Used as Dwellings, Ground Anchors
accompany each listed ground anchor specifying the types of soil for which the anchor is suitable under the requirements of this section. Each approved ...
2010 Residential Code of NY > E Manufactured Housing Used as Dwellings > E604 Anchorage Installations > E604.1 Ground Anchors
402.4.1.2 Special Detailed Requirements Based on Occupancy and Use, Anchor Buildings
The building area and building height of any anchor building shall be based on the type of construction as required by Section 503 as modified ...
2020 Building Code of New York State > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings > 402.4 Construction > 402.4.1 Area and Types of Construction > 402.4.1.2 Anchor Buildings