// CODE SNIPPET
717.3.3.3 Combination Fire/Smoke Damper Actuation
JUMP TO FULL CODE CHAPTER
Combination fire/smoke damper actuation shall be in accordance with Sections 717.3.3.1 and 717.3.3.2. Combination fire/smoke dampers installed in smoke control system shaft penetrations shall not be activated by local area smoke detection unless it is secondary to the smoke management system controls.
Related Code Sections
717.3.3.3 Fire and Smoke Protection Features, Combination Fire/Smoke Damper Actuation
Combination fire/smoke damper actuation shall be in accordance with Sections 717.3.3.1 and 717.3.3.2. Combination fire/smoke dampers installed ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 717 Ducts and Air Transfer Openings > 717.3 Damper Testing, Ratings and Actuation > 717.3.3 Damper Actuation > 717.3.3.3 Combination Fire/Smoke Damper Actuation
717.3.1 Fire and Smoke Protection Features, Damper Testing
with fans on during a fire. Smoke dampers shall comply with the requirements of UL 555S. Combination fire/smoke dampers shall comply ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 717 Ducts and Air Transfer Openings > 717.3 Damper Testing, Ratings and Actuation > 717.3.1 Damper Testing
717.3.2.3 Fire and Smoke Protection Features, Combination Fire/Smoke Damper Ratings
Combination fire/smoke dampers shall have the minimum rating specified for fire dampers in Table 717.3.2.1 and shall have the minimum rating ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 717 Ducts and Air Transfer Openings > 717.3 Damper Testing, Ratings and Actuation > 717.3.2 Damper Rating > 717.3.2.3 Combination Fire/Smoke Damper Ratings
717.3.3.5 Fire and Smoke Protection Features, Corridor Damper Actuation
Corridor damper actuation shall be in accordance with Sections 717.3.3.1 and 717.3.3.2 ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 717 Ducts and Air Transfer Openings > 717.3 Damper Testing, Ratings and Actuation > 717.3.3 Damper Actuation > 717.3.3.5 Corridor Damper Actuation
717.3.3.1 Fire and Smoke Protection Features, Fire Damper Actuation Device
The fire damper actuation device shall meet one of the following requirements: The operating temperature shall be approximately 50°F (10°C) above ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 717 Ducts and Air Transfer Openings > 717.3 Damper Testing, Ratings and Actuation > 717.3.3 Damper Actuation > 717.3.3.1 Fire Damper Actuation Device