// CODE SNIPPET
R802.4.6 Collar Ties
JUMP TO FULL CODE CHAPTER
Where collar ties are used to connect opposing rafters, they shall be located in the upper third of the attic space and fastened in accordance with Table R602.3(1). Collar ties shall be not less than 1 inch by 4 inches (25 mm × 102 mm) nominal, spaced not more than 4 feet (1220 mm) on center. Ridge straps in accordance with Table R602.3(1) shall be permitted to replace collar ties.
Related Code Sections
R802.4.6 Roof-Ceiling Construction, Collar Ties
Where collar ties are used to connect opposing rafters, they shall be located in the upper third of the attic space and fastened in accordance ...
Residential Code 2018 of Kansas > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.4 Rafters > R802.4.6 Collar Ties
R606.5 Wall Construction, Corbeled Masonry
-half of the wall thickness for multiple-wythe walls bonded by mortar or grout and wall ties or masonry headers. One-half the wythe thickness ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.5 Corbeled Masonry
25.7.2 Reinforcement Details, Ties
Ties shall consist of a closed loop of deformed bar with spacing in accordance with (a) and (b): (a) Clear spacing of at least (4/3) d agg (b ...
Building Code Requirements for Structural Concrete of Kansas > 25 Reinforcement Details > 25.7 Transverse Reinforcement > 25.7.2 Ties
1618.104.22.168 Structural Design, Longitudinal Ties
Longitudinal ties shall consist of continuous reinforcement in slabs; continuous or spliced decks or sheathing; continuous or spliced members framing ...
Building Code 2018 of Kansas > 16 Structural Design > 1616 Structural Integrity > 1616.3 Bearing Wall Structures > 1616.3.2 Other Bearing Wall Structures > 1622.214.171.124 Longitudinal Ties