// CODE SNIPPET
611.11 Cold Water
JUMP TO FULL CODE CHAPTER
Where a pool could have a water temperature below 70°F (21°C), a cold water warning sign shall be posted at the point of entry to the pool or at the attraction using such water.
Related Code Sections
611.11 Aquatic Recreation Facilities, Cold Water
Where a pool could have a water temperature below 70°F (21°C), a cold water warning sign shall be posted at the point of entry to the pool ...
Swimming Pool and Spa Code 2015 of Washington > 6 Aquatic Recreation Facilities > 611 Signage > 611.11 Cold Water
611.11 Aquatic Recreation Facilities, Cold Water
Where a pool could have a water temperature below 70°F (21°C), a cold water warning sign shall be posted at the point of entry to the pool ...
Swimming Pool and Spa Code 2018 of Washington > 6 Aquatic Recreation Facilities > 611 Signage > 611.11 Cold Water
601.2 Water Supply and Distribution, Hot and Cold Water Required
with an adequate supply of potable running water piped thereto in an approved manner, so arranged as to flush and keep it in a clean and sanitary condition ...
2018 Washington State Plumbing Code > 6 Water Supply and Distribution > 601.0 General > 601.2 Hot and Cold Water Required
417.5 Plumbing Fixtures and Fixture Fittings, Separate Controls for Hot and Cold Water
Where two separate handles control the hot and cold water, the left-hand control of the faucet where facing the fixture fitting outlet shall control ...
2018 Washington State Plumbing Code > 4 Plumbing Fixtures and Fixture Fittings > 417.0 Faucets and Fixture Fittings > 417.5 Separate Controls for Hot and Cold Water
1.0 Installation Standard for PEX Tubing Systems for Hot- And Cold-Water Distribution, Scope
, crimp, press, and mechanical compression fittings, intended for hot- and cold-water distribution systems within buildings ...
2018 Washington State Plumbing Code > I Installation Standard for PEX Tubing Systems for Hot- And Cold-Water Distribution > 1.0 Scope