// CODE SNIPPET
807.3.7 Clearance for Equipment
JUMP TO FULL CODE CHAPTER
Clearance for electrical service equipment shall be provided in accordance with the NFPA 70.
Related Code Sections
807.3.7 Alterations—Level 2, Clearance for Equipment
Clearance for electrical service equipment shall be provided in accordance with the NFPA 70 ...
Existing Building Code 2018 of Illinois > 8 Alterations—Level 2 > 807 Electrical > 807.3 Residential Occupancies > 807.3.7 Clearance for Equipment
Section 902 Fire Protection and Life Safety Systems, Fire Pump and Riser Room Size
for the installation, as defined by the manufacturer, with sufficient working room around the stationary equipment. Clearances around equipment to elements ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 902 Fire Pump and Riser Room Size
(A) Communications Systems, Outside of Buildings
of circuits not over 150 volts between conductors, where all conductors involved are supported so as to ensure permanent separation, the clearance shall ...
National Electrical Code 2017 of Illinois > 8 Communications Systems > 810 Radio and Television Equipment > 810.18 Clearances — Receiving Stations > (A) Outside of Buildings
225.25 Wiring and Protection, Location of Outdoor Lamps
of the following apply: Clearances or other safeguards are provided for relamping operations. Equipment is controlled by a disconnecting means ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.25 Location of Outdoor Lamps
(A) Equipment for General Use, Clearance
A recessed luminaire that is not identified for contact with insulation shall have all recessed parts spaced not less than 13 mm ( 1 / 2 in.) from ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.116 Clearance and Installation > (A) Clearance