// CODE SNIPPET

703.5 Cleanouts on Building Sewers

Plumbing Code 2015 of Utah > 7 Sanitary Drainage > 703 Building Sewer > 703.5 Cleanouts on Building Sewers

JUMP TO FULL CODE CHAPTER

Cleanouts on building sewers shall be located as set forth in Section 708.

Related Code Sections

703.5 Sanitary Drainage, Cleanouts on Building Sewers

Cleanouts on building sewers shall be located as set forth in Section 708 ...

Plumbing Code 2015 of Utah > 7 Sanitary Drainage > 703 Building Sewer > 703.5 Cleanouts on Building Sewers

703.5 Sanitary Drainage, Cleanouts on building sewers

Cleanouts on building sewers shall be located as indicated in Section 708 ...

Plumbing Code 2018 of Utah > 7 Sanitary Drainage > 703 Building Sewer > 703.5 Cleanouts on building sewers

708.1.2 Sanitary Drainage, Building Sewers

Building sewers smaller than 8 inches (203 mm) shall have cleanouts located at intervals of not more than 100 feet (30 480 mm). Building sewers 8 ...

Plumbing Code 2015 of Utah > 7 Sanitary Drainage > 708 Cleanouts > 708.1 Cleanouts Required > 708.1.2 Building Sewers

708.1.2 Sanitary Drainage, Building sewers

Building sewers smaller than 8 inches (203 mm) shall have cleanouts located at intervals of not more than 100 feet (30 480 mm). Building sewers 8 ...

Plumbing Code 2018 of Utah > 7 Sanitary Drainage > 708 Cleanouts > 708.1 Cleanouts required > 708.1.2 Building sewers

716.6 Sanitary Drainage, Cleanouts

Where the existing building sewer or building drain did not have cleanouts meeting the requirements of this code, cleanout fittings shall ...

Plumbing Code 2018 of Utah > 7 Sanitary Drainage > 716 Replacement of Underground Building Sewers and Building Drains by Pipe-Bursting Methods > 716.6 Cleanouts

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes