// CODE SNIPPET
1910.107(f)(3) Cleaning of Heads
Related Code Sections
1910.107(f)(3) Hazardous Materials, Cleaning of Heads
Sprinklers protecting spraying areas shall be kept as free from deposits as practical by cleaning daily if necessary. (See also paragraph (g ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.107 Spray Finishing Using Flammable and Combustible Materials > 1910.107(f) Protection > 1910.107(f)(3) Cleaning of Heads
1910.272(q)(3) Special Industries,
, and discharge throat of the elevator head. The boot section shall also be provided with a means of access for clean-out of the boot and for inspection ...
OSHA 1910 General Industry > R Special Industries > 1910.272 Grain Handling Facilities > 1910.272(q) Inside Bucket Elevators > 1910.272(q)(3)
1910.213(s) Machinery and Machine Guarding, Inspection and Maintenance of Woodworking Machinery
to stick, jam, or kick back when it is fed to the saw at normal speed. Saws to which gum has adhered on the sides shall be immediately cleaned ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(s) Inspection and Maintenance of Woodworking Machinery
1910.269(r)(6) Special Industries, Backpack Power Units for Use in Pruning and Clearing
While a backpack power unit is running, no one other than the operator may be within 3.05 meters (10 feet) of the cutting head of a brush saw ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(r) Line-Clearance Tree Trimming > 1910.269(r)(6) Backpack Power Units for Use in Pruning and Clearing
1910.261(j)(1) Special Industries, Pulp Shredders
Cutting heads shall be completely enclosed except for an opening at the feed side sufficient to permit only entry of stock. The enclosure shall ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(j) Stock Preparation > 1910.261(j)(1) Pulp Shredders