// CODE SNIPPET
250.12 Clean Surfaces
Related Code Sections
250.12 Wiring and Protection, Clean Surfaces
surfaces to ensure good electrical continuity or shall be connected by means of fittings designed so as to make such removal unnecessary ...
National Electrical Code 2020 of Texas > 2 Wiring and Protection > 250 Grounding and Bonding > 250.12 Clean Surfaces
1210.6.6 Hydronic Piping, Polyethylene Plastic Pipe and Tubing for Ground-Source Heat Pump Loop Systems
-fusion type, joined in accordance with ASTM D 2657. Joint surfaces shall be clean and free from moisture. Joint surfaces shall be heated to melt ...
Mechanical Code of the Texas Industrialized Housing and Buildings Program > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.6 Joints > 1210.6.6 Polyethylene Plastic Pipe and Tubing for Ground-Source Heat Pump Loop Systems
M2105.11 Hydronic Piping, Polyethylene Plastic Pipe and Tubing
-fusion type, and joined in accordance with ASTM D 2657. Joint surfaces shall be clean and free of moisture. Joint surfaces shall be heated to melt ...
Residential Code for one- and two-family dwellings of the Texas Industrialized Housing and Buildings Program > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.11 Polyethylene Plastic Pipe and Tubing
P2906.3.1 Water Supply and Distribution, Heat-Fusion Joints
Joint surfaces shall be clean and free from moisture. Joint surfaces shall be heated to melting temperature and joined. The joint shall ...
Residential Code for one- and two-family dwellings of the Texas Industrialized Housing and Buildings Program > 29 Water Supply and Distribution > P2906 Materials, Joints and Connections > P2906.3 Polyethylene Plastic Piping Installation > P2906.3.1 Heat-Fusion Joints
705.6 Sanitary Drainage, Copper Pipe
All joint surfaces shall be cleaned. An approved flux shall be applied where required. The ...
Plumbing Code of the Texas Industrialized Housing and Buildings Program > 7 Sanitary Drainage > 705 Joints > 705.6 Copper Pipe