• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

(b) 803.1.2 Classification in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code

Ohio Fire Code 2011 > Furnishings Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings > 803 Interior Wall and Ceiling Finish and Trim in Existing Buildings > 803.1 General > 803.1.2 Classification in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code
JUMP TO FULL CODE CHAPTER
Interior wall or ceiling finishes shall be allowed to be tested in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code. Finishes tested in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code shall comply with paragraph (C)(1)(b)(i)(803.1.2.1) of this rule. Interior wall and ceiling finish materials tested in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code and meeting the acceptance criteria of paragraph (C)(1)(b)(i)(803.1.2.1) of this rule, shall be allowed to be used where a Class A classification in accordance with ASTM E 84 as listed in rule 1301:7-7-47 of the Administrative Code is required.

(i) 803.1.2.1 Acceptance criteria for interior finish material tested to NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code

During the 40 kilowatt (kW) exposure, the interior finish shall comply with paragraph (a) of this rule. During the 160 kW exposure, the interior finish shall comply with paragraph (b) of this rule. During the entire test, the interior finish shall comply with paragraph (c) of this rule.

(a) During the 40 kW exposure, flames shall not spread to the ceiling.

(b) During the 160 kW exposure, the interior finish shall comply with the following:

(i) Flame shall not spread to the outer extremity of the sample on any wall or ceiling.

(ii) Flashover, as defined in NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code, shall not occur.

(c) The total smoke released throughout the NFPA 286 test as listed in rule 1301:7-7-47 of the Administrative Code shall not exceed 1,000 m2.

Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.


Copy Section Text

Copy with citation
P Premium Feature

This feature is included in premium subscriptions only. Click below to start a free trial.

Start Free Trial

Related Code Sections


803.1.2 Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings, Classification in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code
Interior wall or ceiling finishes shall be allowed to be tested in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code ...
Ohio Fire Code 2011 > Furnishings Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings > 803 Interior Wall and Ceiling Finish and Trim in Existing Buildings > 803.1 General > 803.1.2 Classification in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code
Section 804 Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings, Interior Wall and Ceiling Trim in New and Existing Buildings
material has been tested as an interior finish in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code and complies ...
Ohio Fire Code 2011 > Furnishings Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings > 804 Interior Wall and Ceiling Trim in New and Existing Buildings
606.16 Ohio Administrative Code 1301:7-7-06 Building Services and Systems, Electrical equipment
Where refrigerants of Groups A2, A3, B2 and B3, as defined in the mechanical code as listed in rule 1301:7-7-47 of the Administrative Code ...
Ohio Fire Code 2011 > Systems Ohio Administrative Code 1301:7-7-06 Building Services and Systems > 606 Mechanical Refrigeration > 606.16 Electrical equipment
804.1 Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings, Interior trim
material has been tested as an interior finish in accordance with NFPA 286 as listed in rule 1301:7-7-47 of the Administrative Code and complies ...
Ohio Fire Code 2011 > Furnishings Ohio Administrative Code 1301:7-7-08 Interior Finish, Decorative Materials and Furnishings > 804 Interior Wall and Ceiling Trim in New and Existing Buildings > 804.1 Interior trim
3319.4.1 Ohio Administrative Code 1301:7-7-33 Explosives and Fireworks, New applications
with the provisions of Chapter 3743. of the Revised Code, this rule and NFPA 1126 as listed in rule 1301:7-7-47 of the Administrative Code ...
Ohio Fire Code 2011 > Fireworks Ohio Administrative Code 1301:7-7-33 Explosives and Fireworks > 3319 Requirements for an Exhibitor’s License > 3319.4 Application period > 3319.4.1 New applications
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms