// CODE SNIPPET

1910.155(c)(39)(i) Class I Standpipe System

OSHA 1910 General Industry > L Fire Protection > 1910.155 Scope, Application and Definitions Applicable to This Subpart > 1910.155(c) Definitions Applicable to This Subpart > 1910.155(c)(39) Standpipe Systems > 1910.155(c)(39)(i) Class I Standpipe System

JUMP TO FULL CODE CHAPTER

Class I standpipe system means a 2 ¹/₂" (6.3 cm) hose connection for use by fire departments and those trained in handling heavy fire streams.

Related Code Sections

1910.155(c)(39)(i) Fire Protection, Class I Standpipe System

Class I standpipe system means a 2 1 / 2 " (6.3 cm) hose connection for use by fire departments and those trained in handling heavy fire streams ...

1910.158(a)(2) Fire Protection, Exception

This section does not apply to Class I standpipe systems ...

OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(a) Scope and Application > 1910.158(a)(2) Exception

1910.158(e)(1)(i) Fire Protection,

The employer shall assure that the piping of Class II and Class III systems installed after January 1, 1981, including yard piping ...

OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(e) Tests and Maintenance > 1910.158(e)(1) Acceptance Tests > 1910.158(e)(1)(i)

1910.155(c)(39)(ii) Fire Protection, Class II Standpipe System

Class II standpipe system means a 1 1 / 2 inch (3.8 cm) hose system which provides a means for the control or extinguishment of incipient stage ...

1910.155(c)(39)(iii) Fire Protection, Class III Standpipe System

Class III standpipe system means a combined system of hose which is for the use of employees trained in the use of hose operations and which ...