// CODE SNIPPET
[F] 4126.96.36.199 Class I, Division I Hazardous Locations
JUMP TO FULL CODE CHAPTER
The area within 10 feet (3048 mm) horizontally from aircraft surfaces and from the floor to 10 feet (3048 mm) above the aircraft surface shall be classified as a Class I, Division I location.
Related Code Sections
4188.8.131.52 Special Detailed Requirements Based on Occupancy and Use, Class I, Division I Hazardous Locations
be classified as a Class I, Division I location ...
Building Code 2018 of Utah > 4 Special Detailed Requirements Based on Occupancy and Use > 412 Aircraft-Related Occupancies > 412.5 Aircraft Paint Hangars > 412.5.8 Electrical > 4184.108.40.206 Class I, Division I Hazardous Locations
2904.2 Manufacture of Organic Coatings, Hazardous Locations
Locations within the confines of the manufacturing room where Class I liquids are handled shall be Class I, Division 2, except locations ...
Fire Code 2018 of Utah > 29 Manufacture of Organic Coatings > 2904 Electrical Equipment and Protection > 2904.2 Hazardous Locations
2703.7.2 Semiconductor Fabrication Facilities, Workstations
comply with NFPA 70 for Class I, Division 2 hazardous locations. Workstations shall not be energized without adequate exhaust ventilation in accordance ...
Fire Code 2018 of Utah > 27 Semiconductor Fabrication Facilities > 2703 General Safety Provisions > 2703.7 Electrical Wiring and Equipment > 2703.7.2 Workstations
6204.2 Organic Peroxides, Outdoor Storage
in outdoor storage areas containing unclassified detonable, Class I or II organic peroxides shall comply with the requirements for electrical Class I ...
2403.2.1 Flammable Finishes, Electrical Wiring and Equipment
in such hazardous locations. Such areas shall be considered to be Class I, Division 1 or Class II, Division 1 hazardous locations in accordance with NFPA 70 ...
Fire Code 2018 of Utah > 24 Flammable Finishes > 2403 Protection of Operations > 2403.2 Sources of Ignition > 2403.2.1 Electrical Wiring and Equipment