// CODE SNIPPET
1926.1101(f)(3)(i) Class I and II Operations
JUMP TO FULL CODE CHAPTER
The employer shall conduct daily monitoring that is representative of the exposure of each employee who is assigned to work within a regulated area who is performing Class I or II work, unless the employer pursuant to (f)(2)(iii) of this section, has made a negative exposure assessment for the entire operation.
Related Code Sections
1926.1101(f)(3)(i) Toxic and Hazardous Substances, Class I and II Operations
who is performing Class I or II work, unless the employer pursuant to (f)(2)(iii) of this section, has made a negative exposure assessment ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1101 Asbestos > 1926.1101(f) Exposure Assessments and Monitoring > 1926.1101(f)(3) Periodic Monitoring > 1926.1101(f)(3)(i) Class I and II Operations
1926.407(b)(2)(ii) Electrical, Marking
for use in Class I, Division 2 locations need not be marked with the class, group, division, or operating temperature ...
OSHA 1926 Construction > K Electrical > 1926.407 Hazardous (Classified) Locations > 1926.407(b) Electrical Installations > 1926.407(b)(2) Approved for the Hazardous (Classified) Location > 1926.407(b)(2)(ii) Marking
1926.1101(m)(1)(i) Toxic and Hazardous Substances, Employees Covered
in Class I, II and III work or are exposed at or above a permissible exposure limit. For purposes of this paragraph, any day in which a worker engages ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1101 Asbestos > 1926.1101(m) Medical Surveillance > 1926.1101(m)(1) General > 1926.1101(m)(1)(i) Employees Covered
1926.1101(e)(1) Toxic and Hazardous Substances,
All Class I, II and III asbestos work shall be conducted within regulated areas. All other operations covered by this standard shall be conducted ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1101 Asbestos > 1926.1101(e) Regulated Areas > 1926.1101(e)(1)
1926.407(b)(2) Electrical, Approved for the Hazardous (Classified) Location
for use in Class I, Division 2 locations need not be marked with the class, group, division, or operating temperature ...
OSHA 1926 Construction > K Electrical > 1926.407 Hazardous (Classified) Locations > 1926.407(b) Electrical Installations > 1926.407(b)(2) Approved for the Hazardous (Classified) Location