// CODE SNIPPET
10.6.2.1.1 Clamps
JUMP TO FULL CODE CHAPTER
[24:10.6.2.1.1]
Clamps shall have the following dimensions:
- 1/2 in. × 2 in. (12 mm × 50 mm) for 4 in. (100 mm) to 6 in. (150 mm) pipe
- 5/8 in. × 21/2 in. (16 mm × 65 mm) for 8 in. (200 mm) to 10 in. (250 mm) pipe
- 5/8 in. × 3 in. (16 mm × 75 mm) for 12 in. (300 mm) pipe [24:10.6.2.1.1.1]
The diameter of a bolt hole shall be 1/8 in. (3 mm) larger than that of the corresponding bolts. [24:10.6.2.1.1.2]
Related Code Sections
10.6.2.1.1 Underground Requirements, Clamps
[ 24: 10.6.2.1.1] Clamps shall have the following ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 10 Underground Requirements > 10.6* Restraint > 10.6.2* Restrained Joint Systems > 10.6.2.1 Sizing Clamps, Rods, Bolts, and Washers > 10.6.2.1.1 Clamps
10.8.3.1.1 Underground Piping, Clamps
[ 24: 10.8.3.1.1] Clamps shall have the following ...
Standard for the Installation of Sprinkler Systems 2013 of New York State > 10 Underground Piping > 10.8 Joint Restraint > 10.8.3* Restrained Joint Systems > 10.8.3.1 Sizing Clamps, Rods, Bolts, and Washers > 10.8.3.1.1 Clamps
2609.6 Welding and Other Hot Work, Clamps
Hose connections shall be clamped or otherwise securely fastened ...
2010 Fire Code of NY > 26 Welding and Other Hot Work > 2609 Piping Manifolds and Hose Systems for Fuel Gases and Oxygen > 2609.6 Clamps
3509.6 Welding and Other Hot Work, Clamps
Hose connections shall be clamped or otherwise securely fastened ...
Fire Code 2015 of New York State > 35 Welding and Other Hot Work > 3509 Piping Manifolds and Hose Systems for Fuel Gases and Oxygen > 3509.6 Clamps
3509.6 Welding and Other Hot Work, Clamps
Hose connections shall be clamped or otherwise securely fastened ...
2020 Fire Code of NYS > 35 Welding and Other Hot Work > 3509 Piping Manifolds and Hose Systems for Fuel Gases and Oxygen > 3509.6 Clamps