// CODE SNIPPET
1910.265(d)(3)(vii) Circular Cutoff Saws
JUMP TO FULL CODE CHAPTER
Circular log bucking or cutoff saws shall be so located and guarded as to allow safe entrance to and exit from the building.
Related Code Sections
1910.265(d)(3)(vii) Special Industries, Circular Cutoff Saws
Circular log bucking or cutoff saws shall be so located and guarded as to allow safe entrance to and exit from the building ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(d) Log Handling, Sorting, and Storage > 1910.265(d)(3) Log Decks > 1910.265(d)(3)(vii) Circular Cutoff Saws
1910.213(g) Machinery and Machine Guarding, Swing Cutoff Saws
The requirements of this paragraph are also applicable to sliding cutoff saws mounted above the table ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(g) Swing Cutoff Saws
1910.243(a)(1) Hand and Portable Powered Tools and Other Hand-Held Equipment, Portable Circular Saws
All portable, power-driven circular saws having a blade diameter greater than 2 in. shall be equipped with guards above and below the base plate ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.243 Guarding of Portable Powered Tools > 1910.243(a) Portable Powered Tool > 1910.243(a)(1) Portable Circular Saws
1910.265(b)(35) Special Industries, Saw Guide
The term saw guide means a device for steadying a circular or bandsaw ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(b) Definitions Applicable to This Section > 1910.265(b)(35) Saw Guide
1910.265(b)(44) Special Industries, Top Saw
The term top saw means the upper of two circular saws on a head rig, both being on the same husk ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(b) Definitions Applicable to This Section > 1910.265(b)(44) Top Saw