// CODE SNIPPET
1926.408(c)(2)(i) Circuits Exposed to Power Conductors
Go To Full Code Chapter
Communication circuits so located as to be exposed to accidental contact with light or power conductors operating at over 300 volts shall have each circuit so exposed provided with an approved protector.
Upcodes Diagrams
Related Code Sections
1926.408(c)(2)(i) Electrical, Circuits Exposed to Power Conductors
Communication circuits so located as to be exposed to accidental contact with light or power conductors operating at over 300 volts shall have each ...
1926.960(e)(3) Electric Power Transmission and Distribution, Loose Conductors
When lines or equipment are connected to or disconnected from energized circuits, an employee shall keep loose conductors away from exposed energized ...
1926.408(c)(3) Electrical, Conductor Location
at least 2 inches (50.8 mm) from conductors of any light or power or Class 1 circuits unless a special and equally protective method of conductor ...
1926.960(g)(4) Electric Power Transmission and Distribution, Flame-Resistant Clothing
: The employee is exposed to contact with energized circuit parts operating at more than 600 volts ...
1926.960(g)(4)(iii) Electric Power Transmission and Distribution,
): This paragraph does not apply to conductors that are capable of carrying, without failure, the maximum available fault current for the time the circuit ...