// CODE SNIPPET
(B) Circuit Breaker Frames
Related Code Sections
(B) Special Occupancies, Circuit Breaker Frames
Frames of dc circuit breakers installed on switchboards shall not be required to be connected to an equipment grounding conductor ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 530 Motion Picture and Television Studios and Similar Locations > 530.64 Direct-Current Switchboards > (B) Circuit Breaker Frames
(A) Wiring and Protection, Circuit Breakers
The use of reconditioned circuit breakers shall comply with (1) through (3): Molded-case circuit breakers shall not be permitted ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.88 Reconditioned Equipment > (A) Circuit Breakers
(2) Equipment for General Use, Circuit Breaker
A branch-circuit inverse time circuit breaker rated in amperes shall be permitted as a controller for all motors. Where this circuit breaker is also ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.83 Ratings > (A) General > (2) Circuit Breaker
(A) Equipment for General Use, Circuit Breakers
(a) Circuit breakers installed indoors shall be mounted either in metal-enclosed units or fire-resistant cell-mounted units, or they shall ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.21 Circuit-Interrupting Devices > (A) Circuit Breakers
10.6.5.4 Fundamentals, Circuit Breaker Lock
Where a circuit breaker is the disconnecting means, an approved breaker locking device shall be installed ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 10 Fundamentals > 10.6 Power Supplies > 10.6.5 Primary Power Supply > 10.6.5.4 Circuit Breaker Lock