// CODE SNIPPET
(2) Circuit Breaker
Related Code Sections
(A) Wiring and Protection, Circuit Breakers
The use of reconditioned circuit breakers shall comply with (1) through (3): Molded-case circuit breakers shall not be permitted ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.88 Reconditioned Equipment > (A) Circuit Breakers
(2) Equipment for General Use, Circuit Breaker
A branch-circuit inverse time circuit breaker rated in amperes shall be permitted as a controller for all motors. Where this circuit breaker is also ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.83 Ratings > (A) General > (2) Circuit Breaker
(A) Equipment for General Use, Circuit Breakers
(a) Circuit breakers installed indoors shall be mounted either in metal-enclosed units or fire-resistant cell-mounted units, or they shall ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.21 Circuit-Interrupting Devices > (A) Circuit Breakers
10.6.5.4 Fundamentals, Circuit Breaker Lock
Where a circuit breaker is the disconnecting means, an approved breaker locking device shall be installed ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 10 Fundamentals > 10.6 Power Supplies > 10.6.5 Primary Power Supply > 10.6.5.4 Circuit Breaker Lock
404.11 Equipment for General Use, Circuit Breakers as Switches
A hand-operable circuit breaker equipped with a lever or handle, or a power-operated circuit breaker capable of being opened by hand in the event ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 404 Switches > 404.11 Circuit Breakers as Switches