// CODE SNIPPET
1910.263(k)(13) Chocolate Melting, Refining, and Mixing Kettles
JUMP TO FULL CODE CHAPTER
Each kettle shall be provided with a cover to enclose the top of the kettle. The bottom outlet of each kettle shall be of such size and shape that the operator cannot reach in to touch the revolving paddle or come in contact with the shear point between the paddle and the side of the kettle.
Related Code Sections
1910.263(k)(13) Special Industries, Chocolate Melting, Refining, and Mixing Kettles
Each kettle shall be provided with a cover to enclose the top of the kettle. The bottom outlet of each kettle shall be of such size and shape ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(k) Biscuit and Cracker Equipment > 1910.263(k)(13) Chocolate Melting, Refining, and Mixing Kettles
1910.304(g)(1)(v)(A) Electrical,
If the system is used exclusively to supply industrial electric furnaces for melting, refining, tempering, and the like; ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(g) Grounding > 1910.304(g)(1) Systems to Be Grounded > 1910.304(g)(1)(v) > 1910.304(g)(1)(v)(A)
1910.1027(f)(1)(ii) Toxic and Hazardous Substances,
Zinc/Cadmium refining*
Cadmium refining, casting, melting, oxide production, sinter plant
50
Pigment ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1027 Cadmium > 1910.1027(f) Methods of Compliance > 1910.1027(f)(1) Compliance Hierarchy > 1910.1027(f)(1)(ii)
1910.262(mm) Special Industries, Dye Kettles and Vats
Pipes or drains of sufficient capacity to carry the contents safely away from the working area shall be installed where there are dye kettles ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(mm) Dye Kettles and Vats
1910.106(c)(2)(iv) Hazardous Materials, Low-Melting Materials
When low-melting point materials such as aluminum and brass or materials that soften on fire exposure such as plastics, or non-ductile materials ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(c) Piping, Valves, and Fittings > 1910.106(c)(2) Materials for Piping, Valves, and Fittings > 1910.106(c)(2)(iv) Low-Melting Materials