// CODE SNIPPET
319.2 Chemical Feeders
JUMP TO FULL CODE CHAPTER
Where installed, chemical feed systems shall be installed in accordance with the manufacturer's specifications. Chemical feed pumps shall be wired so that they cannot operate unless there is adequate return flow to disburse the chemical throughout the pool or spa as designed.
Related Code Sections
319.2 General Compliance, Chemical Feeders
Where installed, chemical feed systems shall be installed in accordance with the manufacturer's specifications. Chemical feed pumps shall be wired so ...
Swimming Pool and Spa Code 2015 of Massachusetts > 3 General Compliance > 319 Sanitizing Equipment > 319.2 Chemical Feeders
Section 508 Public Spas and Public Exercise Spas, Sanitizing, Oxidation Equipment and Chemical Feeders
Where an automatic controller is installed on a spa or hot tub for public use, the controller shall be installed with an automatic pH and an oxidation ...
Swimming Pool and Spa Code 2015 of Massachusetts > 5 Public Spas and Public Exercise Spas > 508 Sanitizing, Oxidation Equipment and Chemical Feeders
Article 215 Wiring and Protection, Feeders
This article covers the installation requirements, overcurrent protection requirements, minimum size, and ampacity of conductors for feeders ...
(B) Wiring Methods and Materials, Feeders
For a feeder rated 100 amperes through 400 amperes, the feeder conductors supplying the entire load associated with a one-family dwelling ...
527 CMR 12.00: MA Electrical Code > 3 Wiring Methods and Materials > 310 Conductors for General Wiring > 310.12 Single-Phase Dwelling Services and Feeders > (B) Feeders
(B) Special Occupancies, Feeders
Where ground-fault protection of equipment is provided for operation of the service disconnecting means or feeder disconnecting means as specified ...
527 CMR 12.00: MA Electrical Code > 5 Special Occupancies > 517 Health Care Facilities > 517.17 Ground-Fault Protection of Equipment > (B) Feeders