// CODE SNIPPET
R607.5.2.2 Channel-Type Restraints
JUMP TO FULL CODE CHAPTER
Related Code Sections
R607.5.2.2 Wall Construction, Channel-Type Restraints
Glass unit masonry panels shall be recessed not less than 1 inch (25 mm) within channels and chases. Channel-type restraints shall be oversized ...
Residential Code 2018 of Kansas > 6 Wall Construction > R607 Glass Unit Masonry > R607.5 Panel Support > R607.5.2 Lateral Support > R607.5.2.2 Channel-Type Restraints
3.3.44 Definitions, Channel
A path for voice or signal transmission that uses modulation of light or alternating current within a frequency band. (SIG-SSS ...
National Fire Alarm and Signaling Code 2016 of Kansas > 3 Definitions > 3.3 General Definitions > 3.3.44 Channel
220.127.116.11 Hanging, Bracing, and Restraint of System Piping, Wire Restraint
The hanger closest to a wire restraint shall be of a type that resists upward movement of a branch line ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 9 Hanging, Bracing, and Restraint of System Piping > 9.3 Protection of Piping Against Damage Where Subject to Earthquakes > 9.3.6 Restraint of Branch Lines > 18.104.22.168 Wire Restraint
10.6* Underground Requirements, Restraint
] Assemblies in which a restraint is made by means of two clamps canted on the barrel of the pipe shall be permitted to use one rod per clamp ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 10 Underground Requirements > 10.6* Restraint
Article 384 Wiring Methods and Materials, Strut-Type Channel Raceway
This article covers the use, installation, and construction specifications of strut-type channel raceway ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 384 Strut-Type Channel Raceway