// CODE SNIPPET
2113.6 Changes in Dimension
Related Code Sections
2113.6 Masonry, Changes in Dimension
The chimney wall or chimney flue lining shall not change in size or shape within 6 inches (152 mm) above or below where the chimney passes through ...
(D) Introduction, Compliance
system or the inch-pound system shall constitute compliance with this Code. Informational Note No. 1: Hard conversion is considered a change ...
National Electrical Code 2017 of Illinois > Introduction > 90 Introduction > 90.9 Units of Measurement > (D) Compliance
104.1 Application and Administration, Dimensions
Dimensions that are not stated as "maximum" or "minimum" are absolute ...
2018 Illinois Accessibility Code > 1 Application and Administration > 104 Conventions > 104.1 Dimensions
(A) General, Dimensions
Rectangular access openings shall not be less than 650 mm × 550 mm (26 in. × 22 in.). Round access openings in a manhole shall be not less than 650 mm ...
National Electrical Code 2017 of Illinois > 1 General > 110 Requirements for Electrical Installations > 110.75 Access to Manholes > (A) Dimensions
1809.9.1 Soils and Foundations, Dimensions
Masonry-unit footings shall be laid in Type M or S mortar complying with Section 2103.2.1 and the depth shall be not less than twice the projection ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1809 Shallow Foundations > 1809.9 Masonry-Unit Footings > 1809.9.1 Dimensions